Download  Print this page

Product Information - Philips CSP7020/00 User Manual

Philips car coaxial speaker csp7020 7"x10" (18cmx26cm) 5-way 550w peak
Hide thumbs
   

Advertisement

Note
Match the "left", "right", "+" and "-" terminals correctly. Revised polarity may
degrade sound quality.
Two 4-ohm speakers, wired in stereo, present a 8 ohm load to each channel
of the amplifier. Most two channel amplifiers work well in this configuration.
However, if two 4-ohm speakers, wired in parallel to a bridged two -channel
amplifier, present a 2-ohm mono load to the amplifier. Most 2-channel
amplifiers do not support 2-ohm mono operation! Amplifier damage may
result!
8
Mount on the speaker as shown below.
9
Press and insert the edges of the grille net.
Tip
The speaker grille can be mounted without the grille net, if you like.
Option 2: Mount on rear tray
You can also mount the speakers into the surface of the rear tray.
Follow the steps in section "Option 1: Mount in door" to mount the
speakers into the rear tray:

4. Product information

Note
Product information is subject to change without prior notice.
f
g
C

Advertisement

Table of Contents
loading

  Related Manuals for Philips CSP7020/00

This manual is also suitable for:

Csp620Csp6920Csp7020