Set Time And Date; Turn On - Philips DC390/11 User Manual

Note
•
The type plate is located on the bottom of the
main unit.
1
Connect the AC power cord to the wall
outlet.

Set time and date

1
In standby mode, press and hold SET
TIME for two seconds.
» The hour digits begin to blink.
2
Press to select the 12/24 hour
format.
3
Press / to set the hour
4
Press SET TIME to confirm.
» The minutes digits begin to blink.
5
Repeat steps 3-4 to set the minute, year,
month, and day.
Tip
•
In 12 hour format, [MONTH--DAY] is
displayed.
•
In 24 hour format, [DAY--MONTH] is
displayed.
•
You can press to toggle between 12 hour
format and 24 hour format during the whole
process.
EN
12
AC ~ MP3 LINK FM
ANTENNA

Turn on

1
Press POWER.
» The unit switches to the last selected
source.
Switch to standby
1
Press POWER again to switch the unit to
standby mode.
» The time and date (if set) appear on
the display panel.