Installation; Pre-Installation Instructions; Installation Procedure - Mitsubishi Electric 800 Series Instruction Manual

2

INSTALLATION

2.1

Pre-installation instructions

Check that the inverter's input power and the control circuit power are both OFF.
CAUTION
• Do not install or remove this product while the inverter power is ON. Doing so may damage the inverter or this product.
• To avoid damage due to static electricity, static electricity in your body must be discharged before you touch the product.
2.2

Installation procedure

 Installing the option
The FR-E800 series inverter has only one plug-in option connector.
NOTE
• Ensure the control circuit terminals are wired before installing the plug-in option. They cannot be wired after the plug-in
option is installed.
• When installing the plug-in option, prevent cables being caught between parts. Otherwise the inverter and the option may be
damaged.
10
INSTALLATION