Using An Accessory Rf Modulator - Philips DVP5160/05 Manual

Connections
RF coaxial cable to TV
2
ANT IN TO TV VIDEO
IN
1
4
DIGITAL
VIDEO OUT
OUT
AUDIO OUT
COAXIAL
COMPONENT VIDEO OUT
IMPORTANT!
– If your television only has a single
Antenna In socket (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the television. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.

Using an accessory RF modulator

A
Use the composite video cable (yellow)
to connect the DVD player's VIDEO
OUT (CVBS) socket to the video input
socket on the RF modulator.
B
Use the RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV
socket on the RF modulator to the
ANTENNA IN socket on the television.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
01-52_dvp5160_05_eng2.indd 12 01-52_dvp5160_05_eng2.indd 12
(continued)
ANT IN
Back of RF Modulator
(example only)
AUDIO IN
R L
CH3 CH4
ANT IN
3
C
To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) sockets of the DVD player to the
corresponding AUDIO IN sockets on the
RF modulator (cable not supplied).
D
Connect the Antenna or Cable TV
service signal to the ANTENNA IN or RF
IN socket on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV).
2007-03-30 4:01:45 PM 2007-03-30 4:01:45 PM