Philips DVP3960/93 Manual page 40

DVD Menu Options
Tips:
– If no display or distorted pictures appears
on the TV screen due to unsupported
resolution, reconnect any available video
output to your DVD player and re-adjust the
resolution setting.
– When changing the resolution of the DVD
player, the HDMI TV will automatically
change to fi t the DVD player resolution.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
40
01-49_dvp3960_93_eng3.indd 40 01-49_dvp3960_93_eng3.indd 40
(continued)
(For DVI TV only)
If a DVI TV is connected (see page 14) all
above resolution options can be chosen,
including the resolution that are not
supported by the TV.
A
Use to select a resolution and
press OK to confi rm.
The menu will appear on the TV.
CONFIRM AGAIN TO USE THIS RESOLUTION
OK
For resolution supported by the DVI TV,
the picture will be in a normal mode,
press
OK to confi rm.
For resolution that are not supported by
the DVI TV, black TV screen appears.
To exit the black screen manually:
Wait for 5 seconds for the auto
recovery.
OR
A
Use the composite video cable (yellow)
to connect the DVD player's TV OUT
(CVBS) jack to the DVI TV Video In jack
to switch to CVBS mode.
B
Select the available resolution that could
be supported by the DVI TV in the HDMI
setup menu.
CANCEL
to highlight { OK } and press
2007-03-30 3:55:56 PM 2007-03-30 3:55:56 PM