Step 3: Setting Up Progressive Scan Feature - Philips DVP5980K/75 User Manual

Getting Started
Step 3 : Setting up
Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan displays twice the
number of frames per second than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Before you start...
– Ensure that you have connected this
DVD player to a progressive scan TV
using the YPbPr connection (see page
10).
– Ensure that you have completed the
basic installation and setup.
A
Turn on your TV and set to interlace
mode (refer to your TV user manual).
Press STANDBY-ON 2 on the
B
remote control to turn on the DVD
player.
C
Select the correct video-in channel.
The DVD background menu appears.
D
Press SETUP.
E
Press to select { Video Setup Page }.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
HD JPEG
HDMI Video Setup
F
Press repeatedly to select
{ Progressive }, then press
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
20
01-59_dvp5980K_75_eng2.indd 20 01-59_dvp5980K_75_eng2.indd 20
(continued)
G
H
I
J
A
B
On
Off
.
Select { On }, then press OK to confi rm.
The menu will appear on the TV.
ACTIVATING PROGRESSIVE SCAN:
1.ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2.CONNECT USING YPBPR(GBR) VIDEO CABLE.
3.IF THERE IS A DISTORTED PICTURE,
WAIT 15 SECONDS FOR AUTO RECOVERY.
OK CANCEL
Press to highlight { OK } and press
OK to confi rm.
Turn on your TV progressive scan mode
(refer to your TV user manual).
The menu will appear on the TV.
CONFIRM AGAIN TO USE PROGRESSIVE
SCAN. IF PICTURE IS GOOD,
PRESS OK BUTTON ON REMOTE.
OK CANCEL
Press to highlight { OK } and press
OK to confi rm..
The setup is now completed and you
can start enjoy the high quality
picture.
To deactivate Progressive Scan
manually:
Wait for 15 seconds for the auto
recovery.
OR
Press OPEN/CLOSE ç on the DVD
player to open the disc tray.
Press numeric keypad '1' on the
remote control.
The DVD background screen appears.
Tip:
– There are some progressive scan TVs and
High-Defi nition TVs that are not fully
compatible with this unit, resulting in the
unnatural picture when playing back a DVD
VIDEO disc in the progressive scan mode. In
such a case, turn off the progressive scan
feature on both the DVD player and your TV.
2007-06-20 3:33:26 PM 2007-06-20 3:33:26 PM