Using The Audio Setup Menu; Analog Output; Digital Audio Setup - Philips DVP5166K/61 Manual

DVD Menu Options

Using the Audio setup menu

A
Press SETUP on the remote control.
The system setup menu appears.
Audio Setup Page

Analog Output

Digital Audio Setup

Sound Mode
Speaker Setup
CD Upsampling
Night Mode
B
Press to select { Audio Setup
Page }.
C
Press to select an item, then press
to access.
Example: { Night Mode }
The options for the selected item
appears.
If the selection in the menu is greyed
out, that means the feature is not
available or not possible to change at
the current state.
D
Use to select a setting and press
OK to confi rm.
Example: { On }
The setting is selected and setup is
complete.
E
To exit, press SETUP.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
36
01-52_dvp5166K_61_eng.indd 36 01-52_dvp5166K_61_eng.indd 36
(continued)
Analog Output
This option allows you to set the stereo
analog output of your DVD player.
A
In 'Audio Setup Page', press
select { Analog Output }, then press
{ Stereo }
Select this option when output delivers
sound from only the two front speakers.
{ LT/RT }
Select this option if your DVD player is
connected to a Dolby Pro Logic decoder.
{ V SURR }
Allows the DVD player to use virtual
surround sound effects.
{ Multi-channel }
Select this to enable Multi-channel
output.
B
Use to select a setting and press
OK to confi rm.
Digital Audio Setup
The options included in Digital Audio
Setup are: {Digital Output} and {LPCM
Output}.
A
In 'Audio Setup Page', press
select { Digital Audio Setup }, then
press .
B
Press
to access.
C
Use to select a setting and press
OK to confi rm.
to
to
to select an item, then press
2007-06-11 5:08:33 PM 2007-06-11 5:08:33 PM
.