Sound And Volume Controls; Setting The Speaker's Channels - Philips DVP5166KX/74 User Manual

Setting the speaker's
channels
You can adjust the delay times (center
and rear only) and volume level for
individual speakers. These adjustments let
you optimises the sound according to
your surroundings and setup.
IMPORTANT!
The speaker settings only available
on Multi-channel audio outputs.
A
Press SETUP.
B
Press repeatedly to select { Audio
Setup Page }.
C
Press to highlight { Speaker
Setup }, then press
Audio Setup Page
Analog Output
Digital Audio Setup
Sound Mode
Speaker Setup
CD Upsampling
Night Mode
Speaker Setup Page
Front Speakers
Center Speaker
Rear Speakers
Subwoofer
Speakers Volume
Speakers Delay
D
Enter its submenu by pressing
E
Press to highlight one of the
options below at a time, then press
{Front Speakers, Center Speaker, Rear
Speakers}
Off – when no speaker is connected.
Large – when connected speakers can
produce low frequency signals below
120Hz.
Small – when connected speakers cannot
produce low frequency signals below
120Hz.
01-52_dvp5166K_56_eng2.indd 45 01-52_dvp5166K_56_eng2.indd 45

Sound and Volume Controls

.
Large
Small
F
G
.
.
{Subwoofer}
On – when a subwoofer is connected.
Off –when no subwoofer is connected.
{Speakers Volume}
Volume Level setting for individual
speakers (-6dB ~ +6dB).
Speaker Setup Page
Front Left
Front Right
Center
Subwoofer
Rear Right
Rear Left
{Speakers Delay}
Delay times setting in relation to the
listening position or distance for center
and rear speakers (1m ~ 10m).
Speaker Setup Page
Center
Subwoofer
Rear Left
Rear Right
Press to adjust the setting that best
suit your surround sound needs.
Press OK to confi rm.
Tip:
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
+6dB
+6dB
+6dB
0dB
+6dB
+6dB
1.0M
1.0M
1.0M
1.0M
45
2007-04-02 10:35:00 AM 2007-04-02 10:35:00 AM