Philips 47PFL7404H/12 Manual
Full hd 1080p digital tv with pixel precise hd
Hide thumbs
Also See for 47PFL7404H/12:
- Quick start manual (12 pages) ,
- Quick start manual (12 pages) ,
- Quick start manual (12 pages)
Related Manuals for Philips 47PFL7404H/12
Summary of Contents for Philips 47PFL7404H/12
-
Page 1: Table Of Contents
Change startup message settings 7 Connect devices Back connectors Side connectors Connect a computer Use a Conditional Access Module Assign a channel decoder Use Philips EasyLink Use a Kensington lock 8 Product information Supported display resolutions Multimedia Tuner/Reception/Transmission Remote control... - Page 2 United Kingdom General No: 0870 900 9070 General National Rate No: 0870 911 0036 Україна 8-800-500-69-70 This information is correct at the time of press. For updated information, see www.philips.com/support. Model Serial www.philips.com/support €0.07 pro Minute €0.06 Per minuut/Par minute Местен...
-
Page 3: Notice
1 Notice 2009 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. - Page 4 Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardisation for early integration in its products.
-
Page 5: Important
TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Contact Philips Consumer Care to have the TV checked before use. • Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight. - Page 6 • When you disconnect the power cord, always pull the plug, never the cable. • Disconnect the TV from the power outlet and aerial before lightning storms. During lightning storms, never touch any part of the TV, power cord or aerial cable. Risk of hearing damage! Avoid using earphones or headphones at high volumes or for prolonged periods of time.
- Page 7 You can find detailed information on standby energy consumption, warranty policy, spare parts and recycling of this TV on the Philips website for your country at www.philips.com. This TV has features that contribute to energy-efficient use. This TV was awarded the European Ecolabel for its environmental qualities.
-
Page 8: Your Product
3 Your product Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers; register your product at www.philips.com/welcome. TV overview This section gives you an overview of commonly used TV controls and functions. - Page 9 b MHEG/TELETEXT Toggles teletext on or off. SOURCE Selects connected devices. d Colour buttons Selects tasks or options. e AD (Audio Descriptor) UK only: Enables audio commentary for the visually handicapped. Not supported on all models. (Home) Toggles the home menu on or off. OPTIONS Accesses options relating to the current activity or selection.
-
Page 10: Use Your Product
4 Use your product This section helps you perform basic operations (see ‘Use more of your product’ on page 12). Switch your TV on/off or to standby To switch on • If the front LED indicator is off, press POWER at the side of the TV. •... -
Page 11: Adjust Tv Volume
Note • When you use a favourite list, you can only select those channels in the list. Switch channels with the channel grid The channel grid allows you to view all available channels in a grid format. Press OK. The channel grid appears. »... -
Page 12: Use Teletext
Watch TV Browse USB Setup Press the Navigation buttons to select [Add new device]. Press OK. A message appears with » selected, prompting you to start the add new device guide. Press OK. Follow the on-screen instructions to » select the type of device and where it is connected. -
Page 13: Use More Of Your Product
5 Use more of your product Change language settings Note • Skip this step if your language settings are correct. When watching TV, press The home menu appears. » Press the Navigation buttons to select [Setup]. [Setup] menu appears. » Press the Navigation buttons to select [Installation] >... -
Page 14: Access The Options Menu
Press the Navigation buttons to select a home menu item: [Watch TV]Switches back to the • aerial source if another source is selected. [Setup]Accesses menus that allow • you to change picture, sound and other TV settings. [Add new device]Adds new devices •... -
Page 15: Change Picture And Sound Settings
Change picture and sound settings Change picture and sound settings to suit your preferences. You can apply pre-defined settings or change settings manually. Note • The flexibility to change settings is limited if the TV location is set to [Shop] mode. Set the TV location to [Home] mode to access all TV settings (see ‘Change TV preferences’... - Page 16 Press OK. Follow the on-screen instructions to » choose your preferred picture and sound settings. Use the picture and sound experience Use the [Picture and sound] experience bar to access frequently used picture and sound settings. Note • All picture settings are available via the [Picture]menu (see ‘Manually adjust picture settings’...
-
Page 17: Change Picture Format
BACK to exit. Press • [Picture] menu is also accessible via the [Setup]menu (see ‘Access the setup menu’ on page 13). The following picture settings can be configured. Depending on the format of the picture source, some picture settings are not available. -
Page 18: Adjust Sound Settings
Press the Navigation buttons to select a picture format. Press OK to confirm your choice. The selected picture format is » activated. • Picture formats are also accessible via the [Setup]menu (see ‘Access the setup menu’ on page 13). The following picture formats can be selected. Note •... -
Page 19: Use Advanced Teletext Features
[Audio language](Digital channels only) • Selects between audio languages when multiple languages are broadcast. [Dual I-II](Analogue channels only) • Selects between audio languages when dual sound is broadcast. [Mono/Stereo]Selects between mono or • stereo if stereo is broadcast. [TV speakers]Turns on or off TV •... - Page 20 • OPTIONS at any time to exit the Press options menu. Select teletext subpages A teletext page can hold several subpages. Subpages are displayed on a bar next to the main page number. Note • Enable cycling of subpages before selecting subpages (see ‘Access the teletext options menu’...
-
Page 21: Create And Use Lists Of Favourite Channels
Create and use lists of favourite channels You can create lists of your preferred TV channels so that you can find those channels easily. Note • Digital radio stations can also be added to favourite lists, if supported. View only channels in a favourite list, or view all channels if a favourite list is currently selected. -
Page 22: Hide And Unhide Channels
Press the Navigation buttons to select the channel to reorder in the grid. A box appears around the selected » channel. Ned 2 RTL 8 N et KetN KetN KetN D isco medy medy o sp Anim Press the Navigation buttons to move the channel to the desired location in the grid. -
Page 23: Use The Electronic Programme Guide
Ned 2 RTL 8 KetN KetN medy medy Euro Press the Navigation buttons to select the channel to unhide. OPTIONS. Press » The options menu appears. Press the Navigation buttons to select [Unhide channel], then press OK. » The channel is unhidden. Note •... -
Page 24: Use Timers
Use the EPG options menu Use the EPG options menu to set or clear reminders, change day and access other useful EPG options. Note • The EPG options are only accessible for 8 days of TV channel information. OPTIONS. When in EPG, press »... -
Page 25: Use Child And Rating Locks
Use child and rating locks You can prevent your children from watching TV by locking the TV and using age ratings. Set or change the child lock code When watching TV, press The home menu appears. » Press the Navigation buttons to select [Setup]. -
Page 26: Use Subtitles
Set parental ratings You can set your TV to display only programmes with age ratings higher than your child’s age. Note • Before you can set parental ratings, you have to enable the feature (see ‘Enable parental ratings’ on page 24). When watching TV, press The home menu appears. -
Page 27: Use The Tv Clock
Press the Navigation buttons to select: • [On]Enables subtitles. [Off]Disables subtitles. • [On during mute]Displays subtitles • only when audio is muted. Press OK. Subtitles are enabled or disabled. » Press BACK to exit or press (Home) to go back to the home menu. Select a subtitle language on digital TV channels Note... -
Page 28: View Photos, Play Music And Watch Video From A Usb Storage Device
USB storage device Caution • Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device. Your TV is fitted with a USB connector that enables you to view photos, listen to music or watch movies stored on a USB storage device. -
Page 29: Listen To Music
Change slideshow settings When viewing a slideshow, press OPTIONS. » The options menu appears. Press the Navigation buttons to select and adjust: [Rotate]Rotates a picture. • [Repeat]Repeats the slideshow. • [Shuffle on]Displays pictures in the • slideshow at random. [Shuffle off]Disables random display •... -
Page 30: Listen To Digital Radio Channels
» The selected digital radio channel plays through the TV speakers. Update the TV software Philips continuously tries to improve its products and we recommend that you update the TV software when updates are available. Check www.philips.com/support for availability. Check the current software version When watching TV, press The home menu appears. -
Page 31: Change Tv Preferences
Update software (from website) Before performing this procedure be sure to: • Set aside some time to complete the entire update. • Have available a USB storage device with at least 256MB of storage space. • Have access to a computer with a USB port and internet access. -
Page 32: Start A Tv Demo
[LightGuide brightness]Sets the • brightness of the front LED indicator or LightGuide. [Teletext 2.5]Enables or disables • Teletext 2.5. Press OK. The TV preference is applied. » Start a TV demo (Not supported on MHEG channels) When watching TV, press DEMO. »... -
Page 33: Install Channels
6 Install channels The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to re-install and fine tune channels. Automatically install channels This section describes how to search and store channels automatically. -
Page 34: Manually Install Channels
Access DVB-C and DVB-T channel networks This option appears only if your country supports DVB-C (Digital Video Broadcasting- Cable). If you have installed both DVB-C and DVB-T channels, you have to switch to the respective network to watch channels on that network. - Page 35 Step 2 Search and store new TV channels In the [Analogue: Manual installation] menu, press the Navigation buttons to select [Find channel]. Press OK. [Find channel] menu appears. » Done 3 8 . 0 0 Press: • Navigation buttons or Numeric buttons to manually enter the channel frequency.
-
Page 36: Manually Update The Channel List
Manually update the channel list If your TV is in standby mode, an update is performed every morning. This update matches channels stored in your channel list with those available from your broadcaster. In addition to this automatic update, you can manually update the channel list. -
Page 37: Change Startup Message Settings
Press OK. [Installation] menu appears. » Note • If you have further problems with the reception of your digital broadcast, contact a specialised installer. Change startup message settings Enable or disable messages that appear at the startup to indicate whether a channel or installation update is needed. -
Page 38: Connect Devices
7 Connect devices For best picture quality, we recommend you use the following connection types, listed below from highest to basic quality: HDMI Y Pb Pr (component) SCART VIDEO (composite) Note • The connectivity diagrams provided in this section are examples only. Other types of connections are possible. - Page 39 a EXT 1/EXT 2 (SCART) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. b SPDIF OUT Digital audio output to home theatres and other digital audio systems. c AUDIO OUT L/R Analogue audio output to home theatres and other audio systems.
-
Page 40: Side Connectors
g HDMI 1/2/3 Digital audio and video input from high- definition digital devices such as Blu-ray players. Note • Only one HDMI connector is available on 19/22” models. The HDMI connector on these models is labelled as HDMI instead of HDMI 1. h TV ANTENNA Signal input from an antenna, cable or satellite. -
Page 41: Connect A Computer
b VIDEO Composite video input from analogue devices such as VCRs. c S-VIDEO Video input from analogue devices such as satellite receivers. Stereo audio output to headphones or earphones. e COMMON INTERFACE Slot for a Conditional Access Module (CAM). f USB Data input from USB storage devices. -
Page 42: Use A Conditional Access Module
DVI-HDMI cable (rear HDMI and • AUDIO IN) AUDIO IN: LEFT / RIGHT HDMI 1 / DVI HDMI 2 / DVI HDMI 3 / DVI DVI-HDMI cable (side HDMI and • AUDIO IN L/R) HDMI cable and HDMI-DVI adaptor • (rear HDMI and AUDIO IN) AUDIO IN: LEFT / RIGHT... -
Page 43: Assign A Channel Decoder
Press OK to confirm your choice. The decoder is assigned. » Use Philips EasyLink Your TV supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI connectors can be controlled by a single remote control. - Page 44 EasyLink features One-touch play When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control. One-touch standby When you connect your TV to devices that support standby, you can use your TV remote control to put your TV and all connected HDMI devices in standby mode.
-
Page 45: Use A Kensington Lock
Enable or disable EasyLink Note • Do not enable Philips EasyLink if you do not intend to use it. When watching TV, press » The home menu appears. Press the Navigation buttons to select [Setup]. [Setup] menu appears. » Press the Navigation buttons to select [Installation] >... -
Page 46: Product Information
8 Product information Product information is subject to change without notice. For detailed product information, go to www.philips.com/support. Supported display resolutions Computer formats • Resolution - refresh rate: • 640 x 480 - 60Hz • 800 x 600 - 60Hz •... -
Page 47: Supported Tv Mounts
Supported TV mounts To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV. -
Page 48: Troubleshooting
Disconnect the power cable from the power outlet. Wait until the TV cools down before reconnecting the power cable. If the blinking reoccurs, contact Philips Consumer Care. You forgot the code to unlock the child lock feature • Enter ‘8888’. -
Page 49: Sound Issues
There is poor TV reception from an antenna connection: • Check that the antenna is properly connected to the TV. • Loudspeakers, unearthed audio devices, neon lights, high buildings and other large objects can influence reception quality. If possible, try to improve the reception quality by changing the antenna direction or moving devices away from the TV. -
Page 50: Usb Connection Issues
• Set the TV picture format to unscaled. Contact us If you cannot resolve your problem, refer to the FAQs for this TV at www.philips.com/ support. If the problem remains unresolved, contact Philips Consumer Care in your country as listed in this user manual. -
Page 51: 10 Index
10 Index analogue channel fine-tune audio balance audio language17 auto volume leveling bass batteries bracket Brightness cables quality CAM, see also Conditional Access Module 41 channel decoder channel grid access and change channels channels channel grid hide channels rename channels reorder/rearrange channels favourite list install... - Page 52 factory settings favourite list create troubleshooting HDMI cable connectors troubleshooting headphone volume Home menu access remove devices install channels automatic manual Kensington lock language troubleshooting light sensor location lock Kensington menu home menu language setup menu teletext troubleshooting Mono/Stereo multimedia listen to music watch videos Multimedia...
- Page 53 shop mode sleep timer smart settings software update version sound settings SPDIF standby troubleshooting subtitles language surround sound S-Video Table of Pages technical specifcations Teletext dual screen enlarge pages features menu search subpages table of pages teletext 2.5 timer sleeptimer tint transmission troubleshooting...