Operation With Visolution - Pepperl+Fuchs SmartRunner 3-D ToF Manual

3-d time-of-flight sensor

Table of Contents

SmartRunner 3-D ToF

Operation with ViSolution

The "ViSolution" software can be used to configure sensor parameters and evaluate measure-

ment results. The software is also very helpful when mounting the sensor, for adjusting camera

parameters such as the exposure time.

The user interface offers various options for displaying the measurement results. You can also

save measurement results to a file for later use. You can change the settings for the sensor and

immediately see how the changes affect the measurement result. The user interface is there-

fore useful for determining the best parameter settings for a particular application.

After the sensor has been set up to provide measurement data, the settings can be saved to a

parameter file on the PC.

To do this, you must have the ViSolution configuration software installed on your PC/laptop.

This configuration software for a PC/laptop can be downloaded free of charge from www.pep-

perl-fuchs.com.

Table of Contents

Do you have a question about the SmartRunner 3-D ToF and is the answer not in the manual?