Sony WX-GT77UI Specifications page 3

Digital Audio Input(s)
Infrared Port
Input(s)
Remote Jack
USB Port(s)
Power
Input Power
Output Power
Power Consumption (in Operation)
Tuner
FM Usable Sensitivity
Frequency Response
S/N Ratio
Selectivity
Stereo Separation
Video Features
Display Technology
Weights and Measurements
Dimensions (Approx.)
Weight (Approx.)
Supplied Accessories
Supplied Accessories
Optional Accessories
Optional Accessories
- Ability to use all forms of USB devices may vary as not all devices are compatible.
This unit can be connected to the following iPods. Update your iPod to the latest
software before you use it.
-iPod Nano 1st generation*
-iPod Nano 2nd generation (aluminum)
-iPod Nano 3rd generation (video)
-iPod 5th generation (video)*
-iPod Classic
-iPod Touch
-iPhone
* When you connect iPod Nano1st generation or iPod 5th generation, Passenger
Control is not available.
-This unit is compliant with MSC (Mass Storage Class) and MTP (Media Transfer Protocol)
type USB devices compliant with the USB standard.
-This unit cannot recognize USB devices via a USB hub.
If you have any questions or problems concerning your unit that are not covered in this
manual, consult your nearest Sony dealer.
Remote Controller Input Terminal
BUS audio input terminal,
Rear USB ,
5
Front Aux In
Optional Wired Remote input
USB Full-Speed
12 V DC car battery (negative ground (earth))
52W x4 High Power - 17 watts per channel minimum continuous average power into
4 Ohms, 4 channels driven from 20 Hz to 20 kHz with no more than 5% total harmonic
distortion.
45W
10 dBf
20 - 15,000 Hz
70 dB
40 dB at 1 kHz
40 dB at 1 kHz
LCD
178 x 100 x 185mm
1.9Kg
Supplied Wireless Card Remote
Parts for installation and connection (1 set)
Replacement remote: RM-X151
CD changer (10 discs): CDX-M757MX
CD changer (6 discs): CDX-T69
Source selector: XA-C40
Aux-in selector: XA-300
HD Radio® tuner: XT-100HD
USB Connection Cable for iPod®: RC-100IP