Sony ZS-BT1 Manual page 13

STANDBY mode
When you slide the POWER ON/OFF STANDBY switch to the STANDBY position,
a beep is emitted, and the blinking interval of the GPS/BATT LED is longer than
usual.
When the "Leplan" on your CLIÉ handheld is turned on and connected to this unit,
GPS function starts positioning. When the "Leplan" is turned off, connection to this
unit is canceled and the power is turned off to save the battery.
POWER ON/OFF STANDBY
Auto Power off function
If the connection between this unit and your CLIÉ handheld is broken for 15 minutes,
this unit turns off automatically.
CLEAR button
When you press the CLEAR button, a short beep is emitted, and the GPS/BATT LED
and Bluetooth LED blink 4 times. A long beep is emitted again and the unit is turned
off. This unit then goes back to the initial mode, and any information recorded
(registration device information and MARK information) is deleted. It may cause a
malfunction if you press the CLEAR button too forcefully.
CLEAR button
13
Sony GU-BT1 (US) 2-067-182-01 (1)
Actual total number: