Turning On This Unit - Sony ZS-BT1 Manual

Turning on this unit

Notes
• Do not turn on or operate this unit onboard an aircraft. This may interfere with the
aircraft instruments.
• Signals from GPS satellites cannot be received indoors in a tunnel, etc.
Turning on this unit
Slide the POWER ON/OFF STANDBY switch to the POWER ON/OFF position.
The power switch returns to the STANDBY position automatically when you
release it.
Turning on this unit
• Short beeps are emitted and the GPS/BATT LED lights green when this unit is
turned on. Then positioning of your current location starts.
It will take ten seconds or more to position.
After positioning is completed, the blink pattern changes.
• The Bluetooth LED lights blue. Then this unit starts to connect to your CLIÉ
handheld. When the connection is complete, the blink pattern of Bluetooth LED
changes.
Turning off this unit
Slide the POWER ON/OFF STANDBY switch to the POWER ON/OFF position.
A short beep and then a long beep is emitted.
10
Actual total number:
POWER ON/OFF STANDBY
GPS/BATT LED
Bluetooth LED
Sony GU-BT1 (US) 2-067-182-01 (1)