Step 2: Connecting The Power Cord; Connect To Audio Component; Step 3: Preparing The Remote - Sony DVP-SR200P Operating Instructions Manual
Sony cd/dvd player operating instructions
Hide thumbs
Also See for DVP-SR200P:
- Manual (24 pages) ,
- Reference manual (13 pages) ,
- Specification sheet (2 pages)
Table of Contents
Advertisement
To connect to your audio component
Use the following pattern.
CD/DVD player
P
B
VIDEO
L
DIGITAL
OUT
VIDEO OUT
COMPONENT
R
VIDEO OUT
Y
P
COAXIAL
R
AUDIO OUT
to DIGITAL OUT
(COAXIAL)
DIGITAL
OUT
COAXIAL
Coaxial digital cable
(not supplied)
to coaxial
digital input
Audio component
with a decoder
: Signal flow
z
For correct speaker location, see the operating
instructions supplied with the connected
components.
1
If your audio component has a Dolby*
2
Digital or DTS*
decoder and a digital input
jack, use this connection. You can enjoy
Dolby Digital (5.1ch) and DTS (5.1ch)
surround effect.
*1
Manufactured under license from Dolby
Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
*2
Manufactured under license under U.S. Patent #:
5,451,942 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital Out are
registered trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc. © 1996-
2007 DTS, Inc. All Rights Reserved.
b
• After you have completed the connection, make
the appropriate settings in Quick Setup (page 12).
Otherwise, no sound or a loud noise will come
from your speakers.
• The TVS effects of this player cannot be used
with this connection.
• In order to listen to DTS sound tracks, you must
use this connection. DTS sound tracks are not
output through the AUDIO OUT L/R jacks, even
if you set “DTS” to “ON” in Quick Setup
(page 12).
US
Step 2: Connecting the
Power Cord
Plug the player and TV power cords into an
AC outlet.
Step 3: Preparing the
Remote
You can control the player using the supplied
remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries
to the markings inside the compartment.
When using the remote, point it at the remote
sensor
on the player.
b
• Do not leave the remote in an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light
from the sun or a lighting apparatus. Doing so
may cause a malfunction.
• If you do not use the remote for an extended
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.
Page 10
Hide quick links:
Advertisement
Chapters
Table of Contents
