Tv Virtual Surround Settings (Tvs) - Sony DVP-NC800H Operating Instructions Manual

TV Virtual Surround
Settings
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
This only works when playing a multichannel
Dolby audio sound track. Furthermore, if the
player is set up to output the signal from the
DIGITAL OUT (OPTICAL or COAXIAL)/
HDMI OUT jack, the surround effect will
only be heard when "DOLBY DIGITAL" is
set to "D-PCM" in "AUDIO SETUP"
(page 59).
1
Press DISPLAY twice during
playback.
The Control Menu appears.
2
Press X/x to select
then press ENTER.
The options for "TVS" appear.
OFF
OFF
TVS DYNAMIC THEATER
TVS DYNAMIC
TVS WIDE
TVS NIGHT
TVS STANDARD
US
46
(TVS)
ENTER
DISPLAY
DVD VIDEO
3
Press X/x to select one of the TVS
modes, the press ENTER.
See the explanations given for each item
in the following section.
• TVS DYNAMIC THEATER
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
To cancel the setting
Select "OFF" in step 2.
◆TVS DYNAMIC THEATER, TVS DYNAMIC,
TVS WIDE
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
◆TVS NIGHT
This feature is useful when you want to hear
the dialog and enjoy the surround sound
effects of "TVS WIDE" at low volume.
◆TVS STANDARD
Use this setting when you want to use TVS
with 2 separate speakers.
Notes
• When the playing signal does not contain a signal
for the rear speakers, the surround effects cannot
be heard.
• When you select one of the TVS modes, turn off
the surround setting of the connected TV or audio
component.
• Make sure that your listening position is between
and at an equal distance from your speakers and
that the speakers are located in similar
surroundings.
(TVS),
• Not all discs will respond to the "TVS NIGHT"
function in the same way.
• If you use the DIGITAL OUT (OPTICAL or
COAXIAL)/HDMI OUT jack and set "DOLBY
DIGITAL" to "DOLBY DIGITAL," and "DTS"
to "ON" in "AUDIO SETUP," sound will come
from your speakers but it will not have the
SURROUND effect.
• The TVS effects do not work when using the Fast
Play or Slow Play functions, even though you can
change the TVS modes.