Whirlpool WHKM-D10 Series Use & Care Manual page 8

Night Light
Press the night light button to turn on the night light. Press it
again to turn off the night light.
Timer
This water cooler is equipped with a timer feature. An audible
alarm will sound once the timer has finished counting down.
To set the timer:
1. Press TIMER button. The timer icon will light up, and the
minutes will begin to flash.
2. Press the feature adjustment buttons, + and –, to number of
minutes that you wish to countdown.
3. Press TIMER again and the hour will begin to flash.
To operate model WHKM-D40
A
J
A. Power ON/OFF button
B. Select button
C. Cold water operation icon
D. Hot water operation icon
E. Temperature setting display.
Press POWER button to turn power on to the water cooler. When power is first supplied to the water cooler, hot (teacup) and the cold
(snowflake) operation icons will flash and the clock will be set to 12:00 AM.
Clock
To set the clock:
1. Press SELECT button. The minutes will begin flashing.
2. Press the feature adjustment buttons, + and –, to set the
minutes.
3. Press SELECT again so the hour begins flashing.
4. Press the feature adjustment buttons, + and –, to set the hour.
5. Press SELECT again to exit the clock set mode.
Energy Saving Mode
Energy saving mode is designed to save energy by shutting the
water cooler on and off at pre-set times.
To turn on the energy saving mode, press ENERGY SAVINGS
button. The energy saving icon will light up, indicating the energy
saving mode is on.
To turn off the energy saving mode, press ENERGY SAVINGS
button so that the energy saving icon is no longer visible.
8
B C D E
F
K L M
F. Timer icon
G. Clock display
H. Feature adjustment and control lock buttons
I. TIMER Set/Start button
J. Night light button
K. Energy saving ON/OFF button
4. Press the feature adjustment buttons, + and –, to set the
number of hours you wish to countdown.
5. Press TIMER again to exit set timer mode and start the timer.
The timer countdown will be displayed in place of the clock,
and the timer icon will flash.
Control Panel Lock
To lock the control panel so that no adjustments can be made to
any of the features, press both features adjustment buttons, +
and –, simultaneously. The control panel lock icon will remain lit
when the control panel is locked.
To unlock the control panel, press both feature adjustment
buttons, + and –, simultaneously. The control panel lock icon will
no longer be visible.
NOTE: The night light is the only feature that can be adjusted
when the control panel is locked.
G H
N O
L. Control panel lock icon
M. Energy saving icon
N. Energy saving operation START icon
O. Energy saving operation STOP icon
P. STOP/CANCEL button
To set the energy saving mode start time:
1. Press SELECT button. The energy saving icon and START
icon will light up and the minutes will begin to flash.
2. Press the feature adjustment buttons, + and –, to set the
minutes when you want the water cooler to turn on (usually
set for sometime in the early morning).
3. Press SELECT again so that the hour begins to flash.
4. Press the feature adjustment buttons, + and –, to set the hour.
To set the energy saving mode stop time:
1. Press SELECT button so that the energy saving icon and
STOP icon light up and the minutes begin to flash.
2. Press the feature adjustment buttons, + and –, to set the time
when you want the water cooler to turn off (usually set for
sometime late at night).
3. Press SELECT again so the hour begins to flash.
4. Press the feature adjustment buttons, + and –, to set the hour.
5. Press SELECT again to leave the energy saving set mode.
I
P