Cleaning The Projector; Cleaning The Projector Exterior; Cleaning The Lens; Cleaning Intake And Exhaust Vents - Casio XJ-A130V User Manual

Periodically clean the projector exterior, lens, intake vents, and exhaust vents on a regular basis.
Important!
Before cleaning the projector, be sure to unplug it from the power outlet and make sure it is
cooled down completely.

Cleaning the Projector Exterior

Wipe the exterior of the projector with a soft cloth that has been moistened in a weak solution of water
and a mild neutral detergent. Be sure to wring all excess moisture from the cloth before wiping.
Never use benzene, alcohol, thinner, or any other volatile agent for cleaning.

Cleaning the Lens

Carefully wipe the lens with a commercially available lens cloth or optical lens paper, like those for
eyeglasses or camera lenses. When cleaning the lens, be very careful to avoid scratching it.

Cleaning Intake and Exhaust Vents

Dust and dirt tend to collect around the intake vents. Because of this, you should use a vacuum
cleaner to clean away accumulated dust and dirt periodically as shown below.
Important!
 Continued use of the projector after dust has accumulated around the intake vents can cause
overheating of internal components and lead to malfunction.
 Certain operating conditions also can cause dirt and dust to accumulate around the
projector's exhaust vents on the front. If this happens, use the same procedure as that
described above to clean the exhaust vents.

Cleaning the Projector

36