Playing Back In Various Modes - Sony DCR-TRV260 Read This First Manual

For TRV260/265:
60min
A Remaining battery time
B Recording mode (SP or LP)
C Tape transport indicator
D Tape counter (hour: minute: second)
E Hi8 format
This appears while playing back Hi8 format
tapes.
F Time code (hour: minute: second: frame)
or tape counter (hour: minute: second)
b Note
• For TRV260/265:
If you use a standard 8 mm
back the tape on your camcorder. Mosaic noise may
appear when you play back the standard 8 mm
tape on other camcorders (including another DCR-
TRV260/TRV265).

Playing back in various modes

To fast forward or rewind during
playback – Picture search
Keep on pressing
(rewind) during playback.
To resume normal playback, release the button.
To view the picture while fast
forwarding or rewinding – Skip scan
Keep on pressing
(rewind) while fast forwarding or rewinding the
tape.
To resume fast forwarding or rewinding, release
the button.
0:00:00:00
tape, be sure to play
(fast forward) or
(fast forward) or
To view pictures at slow speed (slow
playback)*
For TRV228/428/
Press SLOW y on the Remote Commander
during playback. To resume normal playback,
press PLAY.
* For TRV265:
Pictures output from the
played back smoothly in the slow mode.
b Notes
• For TRV228/428:
If slow playback lasts for about 1 minute, the
camcorder automatically returns to normal speed
playback.
• For TRV128/228/328/428:
When you play back a tape recorded in the LP mode,
noise may appear on the LCD screen in the
following cases:
– Slow playback ( TRV228/428)
– Playback pause
– Picture search
TRV265:
DV Interface cannot be
35
Playback