Recording An Image From A Mini Dv Tape As A Still Image - Sony digital handycam DCR-TRV10 Operating Instructions Manual

Recording an image from a mini DV tape
as a still image
– DCR-TRV10 only
Your camcorder can read moving picture data recorded on a mini DV tape and record it
as a still image on a Memory Stick. Your camcorder can also take in moving picture
data through the input connector and record it as a still image on a Memory Stick.
Before operation
Insert a recorded mini DV tape and a Memory Stick into your camcorder.
(1) Set the POWER switch to VTR.
(2) Press N. The picture recorded on the mini DV tape is played back.
(3) Keep pressing PHOTO lightly until the picture from the mini DV tape freezes.
"CAPTURE" appears on the LCD screen or in the viewfinder. Recording does
not start yet.
(4) Press PHOTO deeper. The image displayed on the screen will be recorded on a
Memory Stick. Recording is complete when the bar scroll indicator disappears.
2
PLAY
REW
3
When the ACCESS lamp is lit or flashing
Never shake or strike the unit. As well do not turn the power off , eject a Memory Stick
or remove the battery pack. Otherwise, the image data breakdown may occur.
If " " appears on the LCD screen or in the viewfinder
An incompatible Memory Stick is inserted. Be sure to use proper Memory Stick.
If you press PHOTO lightly in the playback mode
Your camcorder stops mementarily.
Sound recorded on a mini DV tape
You cannot record the audio from a mini DV tape.
Titles have already recorded on mini DV tapes
You cannot record the titles on Memory Sticks. The title does not appear while you are
recording a still picture with PHOTO.
FF
CAPTURE
PHOTO
1
4
PHOTO
89