Searching A Recording By Date - Sony digital handycam DCR-TRV10 Operating Instructions Manual

Searching a recording by date

Searching for the date without using cassette memory
(1) Set the POWER switch to VTR.
(2) Set CM SEARCH in
(3) Press SEARCH MODE repeatedly, until the date search indicator appears.
(4) Press . to search for the previous date or press > to search for the next
To stop searching
Press x.
Notes
•If one day's recording is less than two minutes, your camcorder may not accurately
find the point where the recording date changes.
•The cursor in the
If a tape has a blank portion between recorded portions
The date search function may not work correctly.
Cassette memory
The tape cassette memory can hold six recording date data.
50
The indicator changes as follows:
DATE SEARCH t PHOTO SEARCH t PHOTO SCAN t no indicator
date. Your camcorder automatically starts playback at the point where the date
changes. Each time you press . or >, your camcorder searches for the
previous or next date.
to OFF in the MENU settings (p. 72).
mark indicates the present point on the tape.