Casio pmn User Manual page 44

Using the Setup Menu
IInput Settings
This sub-menu lets you specify whether or not the name of the currently selected input
source should be displayed in the projected image.
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
On: Turns on display of the name of the currently selected input source in the
projected image.
Off: Turns off display of the input source name.
Setting Storage
A single setting is stored, which is applied to all input sources.
IInput Settings
When a computer is connected to the RGB input terminal, the projector automatically detects
the type of RGB signal being sent from the computer and projects the image. Some signals,
however, cannot be detected properly by the projector. When auto detection is not possible for
some reason, try using this setting for a computer signal with a resolution of SXGA (1280 ×
1024) or SXGA+ (1400 × 1050).
Input Source Specific Menu Items
Input Source
RGB
Component
S-VIDEO
VIDEO
No Signal
Setting Explanations
1280 × 1024: Specifies an SXGA (1280 × 1024) resolution RGB signal.
1400 × 1050: Specifies an SXGA+ (1400 × 1050) resolution RGB signal.
Setting Storage
This setting is saved for the RGB input terminal only.
Signal Name Indicator
Available Items (Parentheses indicate defaults.)
(On), Off
Special Signal
Available Items (Parentheses indicate defaults.)
1280 × 1024, (1400 × 1050)
None
* Only when the currently selected input source is RGB.
44