Casio KL-120 User Manual page 26

• • • • • Printing
Tape does not come out when PRINT is pressed.
Possible Causes
Tape cartridge Securely close the cover.
compartment cover is not
closed completely.
No more tape left in the Replace the tape cartridge with a
cartridge. new one.
Tape jam Remove the tape cartridge and pull
out the jammed tape by hand. Cut off
excess tape with scissors, and
carefully replace the cartridge into
the label printer.
Important!
Never allow the tape outlet to
become blocked and never touch
tape as it is being fed during printing.
Tape comes out when PRINT is pressed, but nothing is printed on it.
Possible Causes
Only blank spaces were Input the text you want to print.
input.
Printing is blurred, blotched, broken, etc.
Possible Causes
Improper print density Adjust the print density setting.
setting
Improper loading of the Remove the tape cartridge and
cartridge reload it correctly.
Dirty printer head or Clean the printer head and roller.
rubber roller
Action Page
E-9
E-9
E-9
Action Page
E-10
Action Page
E-22
E-9
E-23
Printer powers down while printing is in progress.
Possible Causes
Battery power is low or Load a fresh set of AA-size alkaline
the wrong type of batteries (supplied by you).
batteries are loaded in
the printer.
Ink ribbon is being fed from the tape outlet along with the tape.
Possible Causes
Tape cartridge loaded Remove the tape cartridge and check
while the ink ribbon is to make sure the ink ribbon is not
slack. broken. Next, take up any slack in the
ink ribbon and then reload the tape
cartridge.
Important!
• Before loading a tape cartridge into
the label printer, always make sure
you take up any slack in the ink
ribbon first.
• If the ink ribbon is broken, you
must change to another tape
cartridge.
Action Page
E-8
Action Page
E-9
E-25