Useful Adjustment Settings; Auto Sync. Adjustment (For Analog Pc Input Mode Only); Fine Sync. Adjustment - Sharp Aquos LC-19D45U Operation Manual

Useful adjustment settings

Auto Sync. Adjustment (for Analog
PC input mode only )
This function enables the screen to be automatically
adjusted to its best possible condition when the analog
terminals of the TV and PC are connected with a
commercially available RGB cable, etc.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press a/b to select "PC Setup", and then
3
press ENTER.
Press a/b to select "Auto Sync.", and then
4
press ENTER.
Press a/b to select "Yes", and then press
5
ENTER.
• Auto Sync. starts.
Input Signal
Auto Sync.
Fine Sync.
Press MENU to exit.
6
NOTE
• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (e.g. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
Yes
No

Fine Sync. Adjustment

Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimism the image.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press a/b to select "PC Setup", and then
3
press ENTER.
Press a/b to select "Fine Sync.", and then
4
press ENTER.
Press a/b to select "Yes", and then press
5
ENTER.
Press a/b to select a specifi c adjustment
6
item among "H-Pos.", "V-Pos.", "Clock" and
"Phase".
a
H-Pos. [ 90]
a
V-Pos. [ 60]
a
Clock [ 90]
Phase [ 8] a
Reset
Selected item
H-Pos. Centres the image by moving it to the left
or right.
V-Pos. Centres the image by moving it up or
down.
Clock Adjusts when the image fl ickers with
vertical stripes.
Phase Adjusts when characters have low
contrast or when the image fl ickers.
Press c/d to adjust the item to your desired
7
position.
Press MENU to exit.
8
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select "Reset", and then press
ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
b
b
b
b
Description
33