Simple Button Operations For Changing Channels; Displaying The Receiving Channel Information - Sharp Aquos LC-19D45U Operation Manual

Watching TV
Simple button operations for
changing channels
You can change channels in several ways.
Method 1
Using CH r / s on the remote control unit, on the
kitchen remote control unit or on the TV.
Method 2
1 Press FLASHBACK to switch to the previously
tuned channel.
2 Press FLASHBACK again to switch back to the
currently tuned channel.
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Method 3
Using remote control buttons 0-9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL.
To select a 1 or 2-digit channel number
(e. g., Channel 5):
Press 5 s ENT
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
To select a 3-digit channel number
(e. g., Channel 115):
Press 1 s 1 s 5 s ENT
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2 s 2 s • (DOT) s 1 s ENT
• When you enter 0–9 only, channel selection will be made if
there is no operation within a few seconds.
• If you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0–9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
Displaying the receiving channel
information
Press DISPLAY once. The display appears
1
as shown on below. If the viewing channel is
a digital channel, the information of channel
number, audio service type, broadcast station,
program information and V-Chip rating will
appear.
AIR DIGITAL
2.1
AUDIO STEREO
(While viewing digital
channel)
Press DISPLAY again to return to normal
2
screen.
• The channel information will disappear if there is no
operation within a few seconds.
SAP ( ST )
1/4 CC1
Ratings
(While viewing analog
channel)
19