Searching for an auto-dial number
If you don't remember the Rapid Key or Speed Dial number in which you have
stored a full fax or phone number, follow these steps to search for the number.
1
If you are sending a fax, load the
document(s).
•
If desired, press
resolution and/or contrast.
A
2
Press
the display (if no name was stored, the number will appear).
3
If you are sending a fax, press
•
If the transmission is completed successfully, the machine will beep once.
•
If an error occurs, the machine will beep three times and print a Transaction
Report to inform you of the problem (see page 87).
If you are making a phone call, lift the handset. Dialing begins. (If you
lifted the handset before searching for the number, press
begin dialing.)
RESOLUTION/
RECEPTION MODE
to set the
Z
(or
) until the name of the other party appears in
REDIAL
START
Sending a Fax by Automatic Dialing
READY TO SEND
. Dialing and transmission begins.
START
to
45