Setting The Reception Mode - Sharp FO-3150 Operation Manual

Setting the Reception Mode

Your fax machine has three modes for receiving incoming faxes:
FAX mode:
Select this mode when you only want to receive faxes on your line. The fax
machine will automatically answer all calls on four rings and receive incoming
faxes.
TEL mode:
Select this mode when you want to receive both phone calls and faxes on the
line connected to the fax machine. All calls, including faxes, must be
answered by picking up the fax machine's handset or an extension phone
connected to the same line.
A.M. mode:
Use this mode only if you have connected an answering machine to the fax
machine (see Chapter 5). Select this mode when you go out to receive voice
messages in your answering machine and faxes on your fax machine.
Setting the reception mode
Make sure a document is not loaded in the document feeder , and then
RESOLUTION/
RECEPTION MODE
press
For more information on receiving faxes in FAX and TEL modes, see Chapter
3, Receiving Faxes . For more information on using A.M. mode, see Chapter 5.
until the arrow in the display points to the desired mode.
RESOLUTION/
RECEPTION MODE
Setting the Reception Mode
RESOLUTION/
RECEPTION MODE
TEL FAX
JAN-03 10:30
A.M.
TEL
FAX
JAN-03 10:30
A.M.
TEL FAX
JAN-03 10:30
A.M.
27