Table of Contents
Advertisement
Title
This command will perform the following comparisons; a comparison between the file information transferred
(copied) from the partner station (parent machine) and the contents of the list file (FCHK.LOG), a comparison
between the checksum data of the list file and the result of checksum calculation performed again for the list file,
and a comparison between the checksum data included in the list file and the result of checksum calculation
performed again for all the files that were transmitted (copied).
There can be a maximum of 65,000 objective files for comparison.
C Language Interface
Calling Sequence
FCHKCE /C [</Option>] <FCHK.LOG file pathname >
(Parameters in [
Return Value
Return code (refer to Chapter 8.9 "Error Messages/Codes".)
Parameters
Option
/D: Does not compare the update data.
FCHK.LOG file pathname
Startup Example
FCHKCE /C "\casio data\"
This checks all transferred files by following content of list file in the "\casio data\" directory of the
transmission side of PA-2400W.
] can be omitted.)
Generally, the update date/time will be automatically changed to the current time of
PA-2400W if file transfer is performed through Explorer of PA-2400W.
Set this option to omit the update date/time from the objective of comparison.
(A copy operation performed between the FLCE and PC card will not update the date/time.)
Specify the pathname of the FCHK.LOG list file in accordance with the naming rules of OS.
Total number of files which can be verified is 65,000 or less. Value of "FILE_NO=" is
65,001 or greater will cause error and force the utility to be terminated.
Command
83
FCHKCE /C
Advertisement
Table of Contents
