Remington Comfort Series Manual page 5

ENGLISH
in stubborn areas may obtain a closer shave, especially along the neck and
chin line.
to the foil heads.
C CLEANING AND MAINTENANCE
To ensure long lasting performance clean after each use.
Ensure the appliance is switched of and unplugged from the mains.
, DRY CLEANING
Pull the foil assembly up to remove from the hair pocket.
Gently tap out the excess hair shavings and use a cleaning brush to clean
out the hair pocket if necessary.
Do not use a brush to clean the shaving foils.
Replace the head assembly.
Lubricate the teeth of the trimmer every six weeks with a drop of sewing
machine oil.
, REPLACING THE FOILS & CUTTERS
To ensure continued high quality performance from your shaver, we
recommend the foils and cutters are replaced regularly.
, Signs that your foil/s and cutter/s need replacing
Irritation: as foils get worn, you may experience skin irritation.
Pulling: as the cutters wear, your shave may not feel as close and you may
feel the cutter pulling your hair.
Wear through: you may notice that the cutters have worn through the foils.
, TO REPLACE THE FOIL
Pull the foil assembly up to remove from the hair pocket.
Insert the new foil assembly on the hair pocket, press down and click into
place.
, REPLACING THE CUTTERS
Grasp the cutter between your thumb and foreinger and pull upwards.
Snap the new cutter into the oscillator tip.
, Note: DO NOT press on the cutter ends as this may cause damage.
Foil and cutters replacement model: SPF-PF72
5