Features - Sanyo Stk-Rcs-7Twsua Technical & Service Manual

FEATURES

• Microprocessor Controlled Operation
• 24-Hour ON or OFF Timer
• 1-Hour OFF Timer
• Night Setback
• Automatic and 3-step Fan Speed
• Air Sweep Control
NOTE
• Since the wired remote controller is designed to be commonly used for various air conditioners, some of the functions of the wireless
remote controller supplied with the indoor unit cannot be used.
• "Single use" means that only one indoor unit is connected with one outdoor unit in a one-unit-to-one-unit configuration.
• "Multiple use" (i.e. Flexi-Multi system) means that two or more indoor units are connected with one outdoor unit in a multiple-unit-to-one-unit
configuration.
REMOTE CONTROL UNIT (DISPLAY)
Displayed when indoor unit sensor
is in use
Displayed when setting timer
(1) Operation mode
AUTO .....................................
(only for COOL/DRY/HEAT
Model)
HEAT ......................................
(only for COOL/DRY/HEAT
Model)
MILD DRY ..............................
COOL .....................................
FAN ........................................
(2) Fan speed
Automatic operation ...............
HIGH .....................................
MEDIUM.................................
LOW .......................................
OI-139-3-EG
• Automatic Restart Function for Power Failure
• Automatic Switching between Cooling and Heating
(This function is available only for "Single use" of COOL/DRY/
HEAT Model.)
• Hot Start Heating System
(This function is available only for COOL/DRY/HEAT Model.)
Symbols
(3) Temperature setting
60 – 86 °F ..............................
When set to 80 °F
temperature indication ...........
(4) Timer
24-hour clock with ON/OFF
program Timer .......................
ON Timer. ..............................
OFF Timer. ............................
1-hour OFF Timer. .................
(5) NIGHT SETBACK..................
(6) Flap angle indication..............
Sweep indication....................
Displayed when operating NIGHT
SETBACK mode
Displayed when setting
temperature
Displayed when temperature is
shown
3