SCHEMATIC DIAGRAM (FRONT)
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during servicing.
Components identified with the IEC symbol
in the parts list and the
! ! !
schematic diagram designated components in which safety can be of
special significance. When replacing a component identified by
! ! !
, use
only the replacement parts designated, or parts with the same ratings of
resistance, wattage or voltage that are designated in the parts list in this
manual. Leakage-current or resistance measurements must be made to
determine that exposed parts are acceptably insulated from the supply
circuit before returning the product to the customer.
This is a basic schematic diagram.
- 18 -
- 19 -