Sanyo MDF-U333 Instruction Manual page 10

FREEZER COMPONENTS
1. Door: To open the door, grip the handle.
2. Handle: Always grip the handle to open the door.
3. Door latch: To lock the door, turn this latch downward. A padlock is also available.
4. Access port: This is used for leading the measuring cable from the freezing chamber to the outside.
MDF-U333 and MDF-U537 has one port and MDF-U537D has two.
5. Lock: By turning to 180 degree to counterclockwise with a key, the door can be locked.
6. Control panel: To display the temperature setting and running condition. See page 10 for details.
7. Caster: 4 casters are provided for easy movement. Separate the front 2 casters from the floor by
adjusting the leveling legs at the time of installation.
8. Defrost mark: When this is hidden by frost, defrost the freezer. Refer to page 23 for instructions.
9. Leveling foot: Serves to adjust the height and to settle the frame evenly.
10. Space for temperature recorder: An automatic temperature recorder (optional part) can be
attached here. See page 13 "Temperature recorder".
11. Storage container: Made of styrol resin. Be careful not to damage the container by a metal
scraper at the time of defrosting.
12. Defrost water vessel & storage container: The container can be used to collect the defrosted
water when defrosting.
13. Remote alarm terminal: Used to notify an alarm condition of the unit to remote location. See
page 18 for details.
14. Battery switch: Switch for battery used for power failure alarm. Always keep "ON". Turn the
switch "OFF" when the unit is in no use for a long period (more than 1 month).
15. Power switch: Switch for the freezer. This switch also activates as an over-current breaker (15
A).
15
13 14
Back side
9