Disassembly - Sanyo NV-E7000 Service Manual

Portable dvd navigation system
Hide thumbs Also See for NV-E7000:
Table of Contents

Advertisement

DISASSEMBLY

How to remove the PCB - ML,MAIN, DVD MECHANISM,MDVC07 and PCB - ML,DVD.
[Refer to figures 1,2,3]
1.Remove 4 screws A which fasten the REAR CABINET ASSY, and the Hook.
Remove FFC,28P which is connected to the PCB - ML,MAIN and PCB - W,LCD.
2.Remove 6 screws B which fasten the PCB - ML,MAIN.
Remove the LEAD WIRES placed on the PCB - ML,DVD side, and FPC.
The PCB - ML,MAIN can be removed.
3.Remove the 3 SPECIAL SCREWS C which fasten the DVD MECHANISM,MDVC07.
Remove FFC,50P which is connected to t he DVD MECHANISM,MDVC07 and
PCB - ML,DVD.
The DVD MECHANISM,MDVC07 can be removed.
4.Remove 8 screws D which fasten the PCB- ML,DVD.
Remove the solder of 2 LEAD WIRES placed on the FAN,MOTOR,DC side.
The PCB - ML,DVD can be removed.
How to remove the PCB- W,LCD [Refer to figures 2]
1.Remove the 2 screws E which fasten the BRACKET, LCD.
2.Remove the solder of 2 LEAD WIRES placed on the SPEAKER side.
The PCB - W,LCD can be removed.
How to remove the PCB - W,KEY. [Refer to figures 2,4]
1.Remove the BUTTON, SCROLL.
2.Remove the 2 screws F which fasten the BRACKET, LCD.
3.Remove FFC,6P.
4.Remove the solder of 3 LEAD WIRES placed on the PCB - W,SENSOR side.
5.Remove the 5 screws G which fasten the PCB - W,KEY.
The PCB - W,KEY can be removed.
How to remove the PCB - W,SENSOR. [Refer to figure 4]
1.Remove SPECIAL SCREW H which fasten the PCB - W,SENSOR.
2.Remove the solder of 3 LEAD WIRES placed on the PCB - W,KEY side.
The PCB - W,SENSOR can be removed.
A
REAR CABINET ASSY
HOOK
Figure1
_
_
10
A

Advertisement

Table of Contents
loading

Table of Contents