Download Print this page

Sanyo ECD-T1137S Owner's Manual page 7

Pll synthesized stereo radio with digital compact disc player
Hide thumbs

Advertisement

The adjustment mode will change in the following order:
Volume
Bass
Treble
Balance
Fader
By pressing VOL button + (11) or VOL button - (12), it is possible to adjust the
desired sound level.
LOUDNESS
Press BND/LOU button (13) for several seconds to reinforce the bass output and
display will show "LOUD". Press it for several seconds again to release this function.
SET THE CLOCK
Press the DSP button (15), the clock is shown on the LCD display. Then hold down
the button until the clock flashes. Then press the MANU/SKIP
button (17) to
change hours or MANU/SKIP button
(16) to change minutes.
SELECT MODE
Press MOD button (6) shortly to choose desired listening mode.
[e.g. radio mode to CD mode to AUX mode]
MUTE
Press MUT button (3) to mute the sound instantly . If any button is pr essed in the
mute state, the mute mode is released.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated functions on the display (8).
EQUALIZATION
Press EQ button (19) to turn on equalization function and to select desired audio
mode. There are five kinds of mode as below:
FLAT
CLASSICS
POP M
ROCK M
DSP OFF
AUXILIARY INPUT
The unit can be connected to a portable audio player through the AUX IN jack (24).
To hear the input signal, press MOD (6) button several times until the display shows
" A U
X " .
FLASHING LED
If the front panel is not installed in the main unit, the LED (25) will be flashing.
RESET
RESET button (26) can be activated with either a ball point pen or thin metal
object. RESET button (26) is to be activated for the following reasons:
- Initial installation of the unit when all wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display .
7

Advertisement

loading

  Related Manuals for Sanyo ECD-T1137S