What To Do When; Trouble Shooting - AEG KO-LAVAMAT 72620 Instruction Book

Operating instructions

What to do when...

The somewhat different, in comparison to older wash-
3
ing machines, whistling noise during spinning is due to
the modern drive system.
A rattling sound on startup – in particular when using
for the first time – is caused by the circulation pump
and is due to the design.

Trouble Shooting

In the event of a malfunction, try to eliminate the problem yourself
with the help of the instructions listed here. If you request customer
service assistance for one of the malfunctions listed here, or for an
operator error, a charge will be billed for the customer service techni-
cian's visit, even during the guarantee period.
• If error code (1, (2 or (d appears at the multi-display, you may
be able to eliminate the error yourself (see the following table of
malfunctions).
After the error has been eliminated, press the O/s (START/PAUSE)
button. If the error code is again displayed, contact customer service.
• Please contact customer service for all other error displays and
inform them of the error code.
Malfunction
Washing machine does
not work.
The machine does not
take in water.
Fault code
played.
28
Mains plug is not plugged in. Insert mains plug.
House fuse in defective.
Door is not closed properly.
O/s (START/PAUSE) button
not pressed for long enough.
Tap is closed.
Sieve in the threaded fitting
(1
is dis-
on the water inlet hose is
blocked.
Possible Cause Remedy
Replace fuse.
Close door; lock must engage
audibly.
Press O/s (START/PAUSE)
button until the program
starts.
Open tap.
Unscrew the hose from the
tap, remove the sieve and
clean under running water