Subscribe to Our Youtube Channel
Related Manuals for auray SS-WM19-TLA2
Summary of Contents for auray SS-WM19-TLA2
- Page 1 SS-WM19-TLA2 Wall Mount Speaker Bracket with Tilt, Length, and Angle Adjustment (Pair) Owner’s Manual...
- Page 2 Thank you for choosing Auray. The heavy-duty Auray SS-WM19-TLA2 wall-mount brackets feature all-steel construction and are built to hold PA speakers with 1⅜-inch holes. The rugged wall-mount design will hold speakers up to 88 pounds and allow you to adjust the arm length, angle, and tilt for optimum speaker placement.
- Page 3 Note: When screwing the plate directly into a wall stud, make sure at least two screws are attached to the stud. Owner’s Manual SS-WM19-TLA2...
- Page 4 Length Adjustment Use the included hex wrench Once the arm length is to loosen the locking screw adjusted, tighten the locking and adjust the length of the screw until the arm is secure. arm. Arm Angle Tilt Adjustment Adjust the arm angle to one of the three preset positions, and insert the safety pin.
- Page 5 Arm Length: 12 to 19 in. (30.5 to 48.3 cm) Arm Angle: 3 position with safety pin and chain Wall Bracket Dimensions (H × W): 19.63 × 4.3 in. (49.9 × 10.9 cm) Weight: 4.51 lb. (2.04 kg) Owner’s Manual SS-WM19-TLA2...
- Page 6 For more information or to arrange service, visit www.aurayaudio.com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.com AURAY is a registered trademark of the Gradus Group. © 2022 Gradus Group LLC. All Rights Reserved.
Need help?
Do you have a question about the SS-WM19-TLA2 and is the answer not in the manual?
Questions and answers