Remote Control Unit Installation Position; Mounting On A Wall - Sanyo CH0971 Technical & Service Manual

7. Remote Control Unit Installation Position

The remote control unit can be operated from either a
non-fixed position or a wall-mounted position.
To ensure that the air conditioner operates correctly, do
not install the remote control unit in the following places:
G
In direct sunlight
G
Behind a curtain or other place where it is covered
G
More than 26' (8 m) away from the air conditioner
G
In the path of the air conditioner's airstream
G
Where it may become extremely hot or cold
G
Where it may be subject to electrical or magnetic
interference
G
Where there is an obstacle between the remote con-
trol unit and the air conditioner (since a check signal
is sent from the remote control unit every 5 minutes)

7-1. Mounting on a Wall

Before mounting the remote control unit, press the
ON/OFF operation button at the mounting location to
make sure that the air conditioner operates from that
location. The indoor unit should make a beeping sound
to indicate that it has received the signal.
Remote control unit mount
Mounting screws
5/32 ¥ 5/8" (4 ¥ 16 mm)
(Included)
To take out the remote control unit, pull it forward.
Press
Set in
place
To prevent loss of the remote control
unit, you can connect the remote
control unit to the mount by passing
a string through the remote control
unit and attachment hole.
Fig. 61
23
Rear side
Hole