To Play Back A Piano Bank Tune; Musical Information System; Adjusting The Tempo - Casio LK-55 User Manual

To play back a Piano Bank tune

1
Find the tune you want to play in the PIANO BANK
List, and note its number.
• See page A-11 for the Piano Bank List.
2
Press the PIANO BANK button to specify the Piano
Bank group.
Indicator appears
NOTE
• Pressing the PIANO BANK button changes the tone to
stereo piano (Tone Number 000).
3
Use the number buttons to input the two-digit tune
number you looked up in step 1.
Example: To select tune number 16 (Ode To Joy), input
1 and then 6.
NOTE
• Tune Number 00 is the initial default Piano Bank tune
setting whenever you turn on keyboard power.
• You can also change the displayed tune number using
the [+] and [–] buttons.
4
Press the PLAY/STOP button to start playback.
5
To stop playback, press the PLAY/STOP button.
• The tune you select continues to play until you stop
it.
642A-E-025A
LK55_e_22-31.p65
Od eT J o o
y
23
Playing a Built-in Tune

Musical Information System

When the keyboard is playing one of its built-in tunes, the
display shows a variety of information about the tune.
Example: Display during Song Bank play
Staff display
A l o h a Oe
Fingering
Chord name
NOTE
• Chord names are not displayed for Piano Bank tunes.

Adjusting the Tempo

Each tune has a preset default tempo (beats per minute) that
is set automatically whenever you select a tune. While the
tune is playing, you can change the tempo setting to a value
in the range of 40 to 255.
To set the tempo
1
Use the TEMPO buttons to set the tempo.
: Increases the tempo value.
: Decreases the tempo value.
Tempo value
NOTE
• While the tempo value is flashing, you can also use the
number buttons or [+] and [–] to input a three-digit value.
Note that you must input leading zeros, so 90 is input
as 090.
• Pressing both the and
time automatically returns the currently selected rhythm
to its default tempo.
• Piano Bank tunes have tempo changes part way through
in order to produce specific musical effects. Note that
the tempo setting automatically returns to the default
whenever a tempo change occurs within one of these
tunes.
03.2.17, 15:32
Flash
TEMPO buttons at the same
E-23