Setting up your French Door Refrigerator
ADjuSting tHE FREEzER DRAwER LEVEL
Adjustment part
1. Locate the height-adjuster ( 1 ) in the freezer drawer.
Unscrew the 8 Phillips screws ( 2 ) slightly to loosen the door.
2. Loosen the controller screw ( 3 ) with a Phillips screwdriver(+).
3. Find the best level to align the door slope.
• After adjustment, tighten the controller screw ( 3 ) and then philips screws.
1
2
Example) the slope is about 0.08inch (2mm) as shown below.
- Rotate the height adjuster to -2.0 to reduce the door slope.
Slope
Reference
plane
Freezer Drawer
3
setting up _19