PRODUCT FEATURES
1. TURNING THE UNIT ON
Slide the REMOTE CONTROL OFF/CHANNEL
SWITCH to the I or II position to turn the REMOTE
CONTROL ON.
Slide the OFF/CHANNEL SWITCH on Angus the RC
T-Rex to the same position (I or II) as the REMOTE
CONTROL. The REMOTE CONTROL and Angus
the RC T-Rex must be on the same channel (I or II)
to send and receive signals.
2. INDICATOR LIGHT FOR REMOTE SIGNAL
The INDICATOR LIGHT will illuminate anytime
a button is pressed or the STEERING WHEEL
is turned. The light indicates a signal is being
sent to Angus the RC T-Rex.
3. TRANSFORMATION BUTTON
Press the TRANSFORMATION BUTTON on the REMOTE
CONTROL or Angus the RC T-Rex to transform Angus the RC
T-Rex from dino to vehicle or from vehicle to dino remotely.
7