Samsung PN50B860Y2F User Manual page 27

Film Mode
„
You can optimize the picture mode for watching movies.
• Off : Turn the Film Mode function off.
• Auto1 : Automatically adjusts the picture for the best quality when watching a film.
• Auto2 : Automatically optimizes the video text when watching a film.
• Cinema Smooth
Film mode is supported in TV, Video, Component (480i / 1080i) and HDMI (1080i).
N
An 1080p 24Hz HDMI signal must be input to use the Cinema Smooth function.
N
BlueOnlyMode→Off/On
„
This function is for AV device measurement experts. This function displays the blue signal
only by removing the red and green signals from the video signal so as to provide a Blue
Filter effect that is used to adjust the Color and Tint of video equipment such as DVD
players, Home Theaters, etc.
Blue Only Mode
N
Screen Burn Protection
„
Configures the Screen Burn Protection options to prevent and reduce pixel burn.
When an image remains in one position too long, it may cause a permanent burn on the
screen.
Preventing Screen Burn-in
To reduce the possibility of screen burn, this unit is equipped with screen burn prevention
technology. This technology enables you to set picture movement up/down (Vertical Line)
and side to side (Horizontal Dot).
The Time setting allows you to program the time between movement of the picture in
minutes.
• Pixel Shift : Shifts the picture to prevent and reduce pixel burn.
Optimum condition for pixel shift;
N
Horizontal
Vertical
Time(min)
The Pixel Shift value may differ depending on the monitor size (inches) and mode.
N
• Side Gray : When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white
balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light.
- Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
- Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
To remove after-images on the screen, use the Scrolling function.
N
Press any key on the remote control to cancel this feature.
N
Reducing the Effects of Screen Burn
If screen burn has occurred, you can select Scrolling to help remove screen burn artifacts.
• Scrolling : This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use
this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on
the screen for a long time (approximately 1 hour).
The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove afterimages
N
on the screen. If the after-image is not removed after performing the function, repeat the function again.
PictureReset→ResetPictureMode/Cancel
❑
Resets all picture settings to the default values.
Select a picture mode to be reset. The reset is performed for each picture mode.
N
BN68-850_Eng.indb 27
: Offers the ultimate cinema experience. (PN50B860Y2F / PN58B860Y2F only)
is available when the picture mode is set to Movie or Standard.
Item TV/AV/Component/HDMI/PC
0~2
0~4
1~4min.
2
4
2 min.
English - 27
Picture Options
▲
Size : 16:9
Digital NR : Auto
HDMI Black Level : Normal
1080 Full HD Motion Demo : Off
Film Mode : Off
Blue Only Mode : Off ►
Screen Burn Protection
U Move E Enter R Return
Screen Burn Protection
Pixel Shift ►
Scrolling
Side Gray : Light
Return
U Move E Enter R
Advanced Settings
Picture Options
Picture Reset
2009-06-18
►
3:55:24