Advanced Features; Media Play; Connecting A Usb Device - Samsung LN26C450 User Manual

P

Advanced Features

Advanced Features
Enjoy photos, music and/or movie files saved on a
MEDIA.P
USB Mass Storage Class (MSC) device and/or your
PC.
O
MEnU
→ EnTERE

Connecting a UsB Device

¦
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the
UsB jack on the side of the TV.
3. When USB is connected to the TV, popup window appears.
Then you can select Media Play.
✎
It might not work properly with unlicensed multimedia files.
✎
Need-to-Know List before using
S.MODE
x
MTP (Media Transfer Protocol) is not supported.
x
The file system supports FAT16, FAT32 and NTFS.
x
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
x

Media Play

only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives and Flash Card Readers. Devices should be connected
directly to the TV's USB port. USB (HDD) is not supported.
x
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
x
Do not disconnect the USB device while it is loading.
x
The higher the resolution of the image, the longer it takes to display on the screen.
x
The maximum supported JPEG resolution is 15360X8640 pixels.
x
For unsupported or corrupted files, the "Not Supported File Format" message is displayed.
x
If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
x
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation, distribution and management of the content in an integrated and
comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the
illegal copying of contents, as well as managing billings and settlements.
x
If more than 2 PTP devices are connected, you can only use one at a time.
x
If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported.
x
If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
be recognized or may malfunction.
x
If the TV has been no input during time set in
x
If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
x
If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
x
If a file deleted from the PC is still found when Media Play is run, use the "Empty the Recycle Bin" function on the PC
to permanently delete the file.
22
English
Media Play
m → Application → Media Play
P.MODE Media Play
Auto Protection Time, the Screensaver will run.
MediaPlay
Videos
Change Device
SUM
SLEEP
View Devices E Enter R Return
TV Side Panel
USB device