Memorizing channels
¦
O
m → Channel → EnTERE
MEnU
t
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
INFO
CH LIST
Auto Program
: Air antenna signal.
Air
■
: Cable antenna signal.
Cable
■
: Air and Cable antenna.
Auto
■
✎
nOTE
x
When selecting the Cable TV system: Selects the
cable system. sTD, hRC and IRC identify various
types of cable TV systems. Contact your local cable
P.MODE
P.SIZE
company to identify the type of cable system that
exists in your particular area. At this point, the signal
source has been selected.
x
After all the available channels are stored, it starts
to remove scrambled channels. The Auto program
menu then reappears.
how to stop Auto Programming
1. Press the EnTERE button.
MTS
2. A message will ask stop Auto Program? Select Yes by
pressing the ◄ or ► button.
3. Press the EnTERE button.
Editing channels
¦
O
m → Channel → Channel list → EnTERE
MEnU
CC
MEDIA.P
t
Channel name Edit
1. Select a channel and press the
TOOls
button.
2. Edit the channel name using the Channel name Edit
menu.
Channel name Edit
(analog channels only): Assign your
■
own channel name.
D
Other Features
¦
O
m → Channel → EnTERE
MEnU
Clear scrambled Channel
This function is used to filter out scrambled channels after
Auto Program is completed. This process may take up to
20~30 minutes.