Table of Contents
Advertisement
Available languages
Available languages
Then enter the Wi-Fi details and touch 'Next'.
Note: Touch '
' to show the entered Wi-Fi
password.
Next, reset the device:
1. Connect the power adapter.
2. Press '
' for 5 seconds and
the Blue indicator light will start
flashing.
3. Choose
'Confirm
indicator
rapidly flashing' and touch 'Next'.
Note: The pairing process must
be completed within 3 minutes of
resetting the device.
If the device is successfully paired, the page
will automatically jump to the next step and
the blue indicator light will stop flashing and
remain illuminated.
Note: If the device did not pair, check that the
Wi-Fi signal is strong enough and the device
is powered on, and then try to pair again.
If this does not work, try adding the device
manually.
Care and cleaning
• Disconnect the product from the mains before cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol, or other chemical solutions as
they can cause damage to the housing and functioning of the product.
• Clean the product with a dry, fibre-free cloth.
Disposal
Product
Electronic devices are recyclable waste and must not be disposed of in household
waste. At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Input....................................................... 200-240 V, 50/60 Hz
Output .................................................... 24 V DC
Mounting ................................................ Double-sided tape + mounting plate + magnetic base
App system requirements ...................... iOS 9.0/Android 5.1 or later
LED driver .............................................. LPS34V-240-1500-2
LED brightness ...................................... 200 lm (for 3000K LED module)
Colour temperature ................................ 2700-10,000 K
Cables ................................................... 22AWG 20 cm (MCU input)
Frequency .............................................. 2.4-2.4835 GHz
Transmission power............................... 17 dBm
Operating/storage conditions ................. -10 °C to +30 °C (operating)
Dimensions (L x D x W) ......................... 300 x 19.5 x 34 mm
Weight ................................................... 850 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights in-
cluding translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2021 by Conrad Electronic SE.
Once the device is paired, it will be confirmed
on-screen. The device can be renamed at any
time.
Touch 'Done' to view the 'Control panel' and
use the product.
OR screws/dowels + mounting plate + magnetic base
Wi-Fi connection
Smart Life app (available in app stores)
22AWG 150 cm (MCU output)
22AWG 100 cm (36W driver output)
-20 °C to +50 °C (storage)
20 % to 80 % RH (non-condensing)
*2377931_v2_0721_02_DS_m_4L_(1)
Advertisement
Table of Contents
