Leroy Merlin 4226 Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

4226

Please Read The User Manual Carefully!

Table of Contents

Need help?

Do you have a question about the 4226 and is the answer not in the manual?

Questions and answers

Summary of Contents for Leroy Merlin 4226

Page 1 4226 Please Read The User Manual Carefully!
Page 2: Table Of Contents
1 Safety instructions 1.1 Operating instructions 1.2 Instructions employed 1.3 Children, persons with special needs 1.4 Intended use 1.5 Risk of fire 1.6 Power supply 1.7 Defective equipment 2 Unpacking and assembly 2.1 Unpacking 2.2 Assembly and electrical connection 3 Operation 3.1 Performance level select fan 3.2 Automatic trailing system 4 Maintenance...
Page 3 Overview of extraction hood Figure 1: Overview 1 Motor box 2 Power plug 3 Cover housing 4 Lighting 5 Side suction-plate is removable. 6 Metal grease filter 7 Light diodes of hood remote control...
Page 4: Safety Instructions
1 Safety instructions 1.1 Operating instructions Read through these operating instructions completely before working with the extraction hood. Store these operating instructions carefully. When forwarding the equipment to a third party, deliver the operating instructions. It is imperative to respect instructions to avoid injuries to persons and damage to equipment.
Page 5: Children, Persons With Special Needs
1 Safety instructions 1.3 Children, persons with spe- Persons (including children), who are not ca- cial needs pable of using the equipment safely (persons with special needs) due to mental, physical or motor capacities, may not use the equipment without the supervision or only with the inst- ructions of a competent person.
Page 6: Risk Of Fire
1 Safety instructions - Open flames can lead to ignition in the extraction hood. - Cleaning the extraction hood with unapproved means or equipment, e. g. with a steam cleaner Maintenance). - Repairs by an unauthorised person ( Customer ser- vice).
Page 7: Unpacking And Assembly
2 Unpacking and assembly 2.1 Unpacking The packaging material is recyclable. Save the raw material and reduce the volume of waste. Resupply package in the material cyc- le. Your technician will revoke the packaging. 6.2 Disposal). 2.2 Assembly and electrical con- Observe the safety instructions for the as- nection sembly and electrical connection (...
Page 8 2 Unpacking and assembly 2.3.2 General information on The extraction hood is attached flush- assembly mounted at the surface in the centre over the cooktop. WARNING! Risk to life due to damage of supply lines. Du- ring boring, supply lines (electricity, gas and/ or water lines) can be damaged.
Page 9 2 Unpacking and assembly 2.3.3 Assembly diagrams Figure M1 Figure Figure Figure M3...
Page 10 2 Unpacking and assembly 2.3.4 Preparations for hood as- - They require a ceiling section with a stable sembly wooden frame made of square timber or the like. 1. Ceiling section The section dimensions are: Vega interior: 1000 mm (VGID 104) 958 mm x 656 mm Vega interior: 1200 mm (VGID 124) 1158 mm x 656 mm - They can connect the exhaust air in all direc-...
Page 11 2 Unpacking and assembly 2.3.5 Assembling the extractor - At the hood, fold down the side suction hood / window toggle plates and remove the metal grease filter (fig. M2a + M2b). - For installation in the ceiling, lift the hood up to the ceiling, connect the exhaust duct CAUTION! firmly to the air vents of the motor box and...
Page 12 2 Unpacking and assembly 2.3.5 Assembling the extractor In the hood compart, a luster terminal with in- hood / window toggle serted cable bridge is installed in a small black box ( Fig. 3.2). Open the box, in which you press together and remove the lid at the long sides...
Page 13: Operation
3 Operation 3.1 Remote control This extraction hood is adjustable with the accompanying remote control. The symbols match the symbols on the operating surface of the hood Switch on or off the hood Adjust the running stage with + or - - This button is not used Adjust automatic trailing system for 15 minutes...
Page 14 3 Operation 3.2.1 Performance level When operating the extraction hood, select Select fan the performance level of the fan. Adjust the performance level of the cooking and roasting vapours that arise. For this purpose: - Press the button of the remote control Figure 4: Light diode central console (fig.3), start the fan motor (stage 2)
Page 15: General Maintenance Instructions
3 Operation 3.2.3 Automatic safety shutdown After 4 hours of uninterrupted operation of the hood or/and lighting that is switched on, the hood is automatically switched off. Located above the right rear metal grease 3.2.4 Emergency disconnection of the filter is equipment a black box with the emergency disconnector.
Page 16: Maintenance
4 Maintenance INSTRUCTION! The extraction hood is regularly maintained and cleaned to guarantee safety, function and performance. Clean the extraction hood directly after instal- 4.2 Cleaning the extraction lation and later when it is contaminated. hood CAUTION! Remaining film adhesives on the stainless steel surface can lead to stains.
Page 17: Clean The Metal Grease Filter
4 Maintenance - Soak up and dry fresh drops or stains (e.g. from acidic liquids, such as fruit juices) immediately with a cloth subsequently - Do not pull hot, hard and sharp-edged objects over painted surfaces or bump against these surfaces. Stainless steel surfaces For the maintenance of stainless steel sur- face, special stainless steel care agents are...
Page 18: Removing And Inserting The Metal Grease Filter
4 Maintenance - Loosen the side suction plate from the 4.4 Removing and locking mechanism and fold downwards (rear inserting the metal grease filter hinges prevent it from falling out) Figure 5). - Press the handle strip of the metal grease filter to the back.
Page 19: Maintenance Intervals
4 Maintenance CAUTION! Power damage when the maintenance interval is not complied with. Due to excessiveuse, the metal grease filter and the activated coal filter with grease and dirt particles can be clogged, in which the functionality of the extraction hood is severely affected.
Page 20 4 Maintenance 4.6 Replacing the light source Halogen lights 3W/230V with the socket GU10 (bajonet connection). For this purpose: Remove the grease filter(s), which are located next to the defective light source. The halogen light is installed and inserted in clamps.
Page 21: Malfunctions
5 Malfunctions/Causes/Solutions INSTRUCTION! The work listed below in the table of errors is performed by the user or by the servicing technician commissioned by him. Malfunction potential cause Solution Extraction hood • Power supply is not Connect power supply is not working connected Check fuse •...