Adjusting Sound Settings
MENUm → Sound → Equalizer → ENTERE
Adjusts the sound mode.
■ Balance L/R: Adjusts the balance between the right and
■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth
Adjustment): Adjusts the level of specific bandwidth
■ Reset: Resets the equalizer to its default settings.
MENUm → Sound → ENTERE
SRS TruSurround HD (Off / On)
This function provides a virtual 5.1 channel surround sound
experience through a pair of speakers using HRTF (Head
Related Transfer Function) technology.
(digital channels only)
Digital-TV broadcasts are capable of
simultaneous transmission of many audio
tracks (for example, simultaneous translations
of the program into foreign languages).
You can only select a language among
the ones being broadcasted.
Multi-Track Sound (MTS)
(analog channels only)
■ Mono: Choose for channels that are
broadcasting in mono or if you are having
difficulty receiving a stereo signal.
■ Stereo: Choose for channels that are
broadcasting in stereo.
■ SAP: Choose to listen to the Separate
Audio Program, which is usually a
Depending on the particular program being broadcast,
you can listen to Mono, Stereo or SAP.
Auto Volume (Off / On)
Because each broadcasting station has its own signal
conditions, the volume can vary as you switch between
channels. This feature lets you automatically adjust the
volume of the desired channel by lowering the sound output
when the modulation signal is high or by raising the sound
output when the modulation signal is low.
Speaker Select (External Speaker /
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
When Speaker Select is set to External Speaker, the
sound settings will be limited.
When Speaker Select is set to External Speaker.
TV Speaker: Off, External Speaker: On
When Speaker Select is set to TV Speaker.
TV Speaker: On, External Speaker: On
If there is no video signal, both speakers will be mute.
Sound Reset (Reset All /
Reset Sound Mode / Cancel)
■ Reset All: Restore all sound settings to the factory
■ Reset Sound Mode: Returns all sound values in the
currently selected mode to the default settings.
Setting the Time
MENUm → Setup → Time → ENTERE
■ Clock: Setting the clock is for using various timer
features of the TV.
The current time will appear every time you press
If you disconnect the power cord, you have to set
the clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the
time from a digital channel.
buttons will not operate and the
The antenna must be connected in order to set
the time automatically.