Problems Related To Audio; Problems Related To Remote Control; Q & A - Samsung SyncMaster 710MP User Manual

The image is too light or too dark
Screen color is inconsistent.
Color image is distorted with
dark shadows.
White color is poor.
Power Indicator blinks green.
The screen is blank and is
blinking.

3. Problems related to Audio

Problems related to audio signals and their solutions are listed below.
Problems
No sound
Sound level is too low.
Sound is too high pitched or too
low pitched

4. Problems related to Remote Control

Problems related to the remote control and their solutions are listed.
Problems
The remote control buttons do
not respond.
Q & A
Question
How can I change the frequency?
How can I adjust the resolution?
Adjust the Brightness and Contrast.
(Refer to the Brightness, Contrast)
Adjust color using Color Control
The monitor is using its power management system.
Press any key on the keyboard
If you see the "TEST GOOD" message on the screen when
you press the MENU button, check the cable connection
between the monitor and the computer to ensure that the
connector is properly connected.
Solutions
Ensure that the audio cable is firmly connected to both the
audio-in port on your monitor and the audio-out port on your
sound card.
(Refer to the Connecting the
Check the volume level.
(Refer to the Volume)
Check the volume level.
(Refer to the Volume)
If the volume is still too low after turning the control to its
maximum, check the volume control on the computer sound
card or software program.
Adjust the Treble and Bass
Items to check
Check the battery polarities (+/-).
Check if the batteries have been exhausted.
Check if the power is on.
Check if the power cord is securely connected.
Check if a special fluorescent or neon lamp is on in the
vicinity.
Frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version
of the driver used.
(Refer to the computer or the video card manual for details.)
Windows XP :
Set the resolution at the Control Panel→Appearance and
under OSD Picture menu.
Monitor)
to appropriate level.
Answer