Setting Up And Connecting; Set-Up Location Requirements; Electrical Connection - Silvercrest SV 125 C3 Manual

Vacuum sealer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 4

Setting up and connecting

Set-up location requirements

For safe and trouble-free operation of the device , the set-up location must fulfil
the following requirements:
When setting it up, place the appliance on a firm, flat and horizontal
surface.
Do not place the device in a hot, wet or extremely damp environment or in
the vicinity of flammable materials.
The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.

Electrical connection

CAUTION
Before you connect the appliance, compare the connection data (voltage
and frequency) on the data plate with that of your mains power network.
These data must agree so that no damage is sustained by the device.
Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
Ensure that the power cable is not taut or kinked.
Do not let the power cable hang over edges (trip wire effect).
Insert the plug into the mains mains power socket.
SV 125 C3
GB │ IE
 7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

400318 2107

Table of Contents