Using Reverb; Using Chorus; Change Split Point - Casio CDP-220R User Manual

cr
5.
Pressing again to unsplit the keyboard (so it
plays only the tone you selected in step 1).
cr
• Each press of toggles between split (two tones) and
unsplit (one tone).
• If you turn on both layer and split, layering will be applied to
the right side range of the keyboard only.
To change the split point
1.
While holding down
where you want the split point to be.
The key you press will become the lowest note of the right
side range of the split keyboard.
Example: Setting middle C (C4) as the split point.
Key name
C 4

Using Reverb

Reverb adds reverberation to notes. You can change the
duration of the reverb.
1. ck
Press (FUNCTION) and then use the
(10-key) [4] (U) and [6] (I) keys to display
"Reverb" (page E-7).
R e v e r b
br
2.
Use the (10-key) [–] and [+] keys to select
the reverb setting you want.
Off (oFF) Turns off reverb.
1 to 10 The larger the number selected, the longer
the reverb duration.
Indicator disappears when reverb is turned off.
cr
, press the keyboard key
br
Controlling the Keyboard Sounds

Using Chorus

Chorus is a function that adds depth and breadth to notes. It
makes you sound as if you are playing multiple instruments.
ck
1.
Press (FUNCTION) and then use the
(10-key) [4] (U) and [6] (I) keys to display
"Chorus" (page E-7).
C h o r u s
2. br
Use the (10-key) [–] and [+] keys to select
the chorus type you want.
There are five chorus types, plus an off setting.
Indicator disappears when chorus is turned off.
• The actual effect produced by chorus depends on the tone
you are using.
br
E-15