IMPORTANT SAFETY INSTRUCTIONS Caution Read Rules for Safe Operation and Instructions Carefully. WARNING 1. If the supply cord is damaged, it must be replaced by manufacturer, its service agent or a similarly qualified person in order to avoid a hazard. 2.
IMPORTANT SAFETY INSTRUCTIONS WARNING 13. At any time the water level in the tank shall not exceed "MAX" (maximum) scale, and during humidification, the total water level in the tank shall be controlled, and shall not be below "MIN" (minimum) scale. 14.
IMPORTANT SAFETY INSTRUCTIONS WARNING Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
PRODUCT INTRODUCTION Notice Pictures in the manual are for reference only, and real objects within the packaging box will prevail in the end. Parts name Control part Ice crystal box Water tank buckles Water tank...
INSTALLATION INSTRUCTIONS 1 Take the two parts of the base out of the box, align the centers of the two bases and place them crosswise, then rotate one of the bases to align the holes and snap them together. 2 Align the fuselage clip line with the base clip line, and press the fuselage into the base, you can fix it with screws at the mark to the base.
Page 7
INSTRUCTIONS Guidance on feeding water and disassemble & washing of the water tank Pull out the water tank completely, Pull the water tank buckle place it on a stable place, add water to the horizontal state. and push the water tank into the fuselage. Pull out the tank completely to clean Unscrew the rotary knob in "—"...
Page 8
INSTRUCTIONS Guidance on feeding water and disassemble & washing of the water tank Push the water tank inside slowly, and stir the water tank buckle to lock it up. Usage of the ice crystal box Notice ① The ice crystal box can be frozen repeatedly and recycled; You can also choose not to use it based on the temperature.
Page 9
INSTRUCTIONS Operating instructions of the machine body Function description Buttons Product starts or stops. Anion indicator light is on when the product is on, and the light is off when the product is turned off. Touch this button to start/stop the swing. Short press this button to switch wind speed, low , medium , high...
INSTRUCTIONS Remote control button description Notice The remote control should be normally used within 5 meters of the front of the product and 30 degrees of the deviation angle. The battery contains many heavy metals, acids and bases, etc., which may threaten human's health; Waste batteries should be recycled separately.
CLEANING AND MAINTENANCE Replace water After stopping the cool wind function for 2 minutes, it's applicable to pull out the water tank to replace Stop the cool wind water, as water in the pipeline and wet curtain flows function for 2 minutes. back to the water tank.
MAINTENANCE INSTRUCTION The fan requires little maintenance. Do not try to fix it by yourself. Refer it to qualified service personnel if service is needed. 1. Before cleaning and assembling, fan must be unplugged. 2. To ensure adequate air circulation to the motor, keep vents at the rear of the motor free of dust.
Page 13
CE Marking: 93 / 68 / EEC RoHS Directive: 11 / 65 / EU & 15 / 863 / EU The detailed declaration of conformity can be found at: www.morris.gr Exclusive importer in Greece: KALLIOPI KARIDA & CO., LP 87A, 17 th Noemvriou str, P.C. 55535 Thessaloniki –...
Need help?
Do you have a question about the MAC-16252 and is the answer not in the manual?
Questions and answers