Playback; Setting Cue - Pioneer CDJ-850 Operating Instructions Manual

Playback

e f
PC
USB
STOP USB
DISC
1
1 / 16
TIME AUTO
MODE CUE
2
1 / 8
IN / CUE OUT
LOOP
4
1 / 4
IN ADJUST OUT ADJUST
8
1 / 2
AUTO
BEAT LOOP
BEAT
SELECT
DIRECTION
5
REV
TRACK SEARCH
4
SEARCH
3
2
CUE
PLAY / PAUSE
REV
1
1 Load the source onto this unit.
2 Press either [USB] f or [DISC] e.
This selects the source.
! If tracks are loaded from another source, a warning message is
displayed. After checking the message, press the rotary selector to
turn the message off and switch the source.
3 Turn the rotary selector p.
Select the track.
! To move to a lower layer in the folder or category, select the folder
then press the rotary selector.
! To return to a higher layer, press [BACK].
! Press [BACK] for more than 1 second to move to the top layer.
4 Press the rotary selector p.
The track is loaded and playback begins.
! When a disc containing music files recorded with a hierarchical
structure is loaded, playback starts from the tracks in the upper-
most level.
Pausing
During playback, press [PLAY/PAUSEf] 1.
! Playback resumes when [PLAY/PAUSEf] is pressed again.
 Resuming playback from the position playing
just before the disc was ejected (Resume)
After ejecting the disc, immediately reload that same disc
into this unit.
! The resume function only works when the same disc is ejected
then reloaded before loading another disc.
! The resume function does not work for USB devices.
Forward and reverse scanning
Press [SEARCH m, n] 3.
The disc is forwarded when [n] is pressed and held in.
The disc is reversed when [m] is pressed and held in.
20
En
n
UTILITY
BACK TAG TRACK
BROWSE TAG LIST INFO MENU /REMOVE
RELOOP/ EXIT CUE / LOOP
DELETE MEMORY
CALL
FWD
MULTI PLAYER
Finding the beginnings of tracks (Track
Search)
p
Press [TRACK SEARCH o, p] 4.
Press the [p] to move to the beginning of the next track.
STANDBY
DISC EJECT
When [o] is pressed, playback returns to the beginning of the cur-
rently playing track. When pressed twice in a row, playback returns to
the beginning of the previous track.
! When auto cue is turned on, the set searches for the beginning of
VINYL
SPEED ADJUST
the track and pauses there (page 21).
TOUCH / RELEASE
JOG MODE
Playing in reverse
VINYL
TEMPO
6 10 16 WIDE
Press [DIRECTION REV] 5.
MASTER
The [DIRECTION REV] indicator lights and the track is played in the
TEMPO
reverse direction.
! When the music files are recorded in a folder structure, only tracks
within the same category/ folder can be played in reverse. Also note
that reverse playback may not start immediately.
! The direction in which the playing speed is increased or decreased
0 according to the direction in which the jog dial is turned is
reversed.
! When such operations as track searching and loop playback are
performed during reverse playback, the audio memory status dis-
TEMPO
play on the jog dial display section flashes and scratch play may
CDJ-850
not be possible.

Setting Cue

USB
STOP
1
1 / 16
2
1 / 8
4
1 / 4
8
1 / 2
AUTO
BEAT LOOP
8
BEAT
SELECT
7
6
DIRECTION
5
REV
TRACK SEARCH
4
SEARCH
3
2
CUE
PLAY / PAUSE
1
1 During playback, press [PLAY/PAUSEf] 1.
Playback is paused.
2 Press [CUE] 2.
The point at which the track is paused is set as the cue point.
The [PLAY/PAUSEf] indicator flashes and the [CUE] indicator
lights. No sound is output at this time.
! When a new cue point is set, the previously set cue point is
canceled.
h m
UTILITY
BROWSE TAG LIST INFO MENU
PC
USB
DISC
TIME AUTO
MODE CUE
IN / CUE OUT RELOOP/ EXIT CUE / LOOP
LOOP CALL
IN ADJUST OUT ADJUST
REV
p
BACK TAG TRACK
/REMOVE
STANDBY
DISC EJECT
s
VINYL
SPEED ADJUST
TOUCH /
RELEASE
DELETE MEMORY
JOG MODE
VINYL
TEMPO
6 10 16 WIDE
MASTER
TEMPO
0
FWD
TEMPO
CDJ-850
MULTI PLAYER